|
Prostar
816
*Program changes need to be made from the attendant phone.
- With
the handset on-hook, dial #04.
- Dial
the passcode (4321), 1, and #.
- Dial
#55. Display shows [YY MM DD W HH MM].
- Dial
new information as follows:
- YY
= Last two digits of the year
- MM
= Two digit month (01-12)
- DD
= Two digit day of the month (01-31)
- W
= Day of the week (1-7, 1 for Monday and 7 for Sunday)
- HH
= Two digit hour (use military time)
- MM
= Minutes (00-59)
- Dial
# to set current date and time.
back
to top...
Prostar 816 Plus
*Program changes need to be made from the attendant phone.
- With
the handset on-hook, dial #06.
- Dial
the passcode (4321), 1, and #.
- Dial
#55. Display shows [YY MM DD W HH MM].
- Dial
new information as follows:
- YY
= Last two digits of the year
- MM
= Two digit month (01-12)
- DD
= Two digit day of the month (01-31)
- W
= Day of the week (1-7, 1 for Monday and 7 for Sunday)
- HH
= Two digit hour (use military time)
- MM
= Minutes (00-59)
- Dial
# to set current date and time.
back
to top...
Prostar 56ex/120mx
*This must be done using an 824 display keyset.
- While
on-hook, dial #20.
- The
display shows [OPEN SYSTEM PGM - ENTER CODE:].
- ·
Dial the four digit passcode (4321).
- The
display shows [OPEN SYSTEM PGM - CLOSED].
- The
display shows [OPEN SYSTEM PGM - OPENED].
- Press
#.
- Dial
#70.
- Enter
the new information as follows:
- YY
= Year, the last two digits of the year.
- MM
= Month, enter 01 for January, 12 for December.
- DD
= Day of the month, enter 01-31.
- W
= Day of the week, enter 0 for Sunday, 6 for Saturday.
- HH
= Hours, enter 2 digit hour. Use military time 00-24.
- MM
= Minutes, enter 00-59.
back
to top...
Samsung DCS / DCS50si / DCSC / iDCS100 / iDCS500
- While
the handset is on-hook, press TRSF and dial 200.
- The
display shows [ENABLE CUS> PROG. PASSCODE]
- Dial
the four digit passcode (1234).
- The
display shows [ENABLE CUS. PROG. - DISABLE]
- The
display shows [ENABLE CUS. PROG. - ENABLE]
- Press
TRSF.
- Press
TRSF and dial 505.
- Enter
the new information as follows:
- W
(Day of the week): 0 for Sunday and 6 for Saturday.
- MM
(Month): Enter 01 for January and 12 for December.
- DD
(Day of the month): Enter 01-31.
- YY
(Year): Enter the last two digits of the year.
- HH
(Hours): Enter 2 digit hour. Use military time 00-24.
- MM
(Minutes): Enter 2 digit minutes.
back
to top...
Inter-Tel
Axxess / Inter-Tel Axxess 8000 Series / Inter-Tel Axxent / Inter-Tel
Eclipse - Executone IDS
*Program changes are required to be performed from any designated
system administrator's telephone.
- While
on-hook, dial 9800.
- Display
shows [DATE (current date).]
- If
you do not need to change the date, press # to skip to the
TIME.
- Use
the keypad to enter the month, day, and year.
- Example:
dial 010196 for January 1, 1996.
- Display
shows TIME (current time).
- If
you do not need to change the time, press # twice to exit.
- Use
the keypad to enter the time in hours and minutes.
- Example:
dial 0900 for 9:00.
-
Select AM or PM. Press 1 for AM or press 2 for PM.
- Display
shows [SYSTEM DATE AND TIME UPDATED].
Note:
You may backspace to correct information by pressing MUTE or you
may press * to cancel and leave it unchanged and start over.
back
to top...
IMX 612 / 1224 / 2460
*Programming changes must be performed at extension 100
Note: If you make a mistake while performing the following procedure,
lift and replace the handset to start over, or press MUTE to backspace.
- While
on-hook, press SPCL and dial 021.
- Display
shows [SET TIME OF DAY}.
- Using
the keypad, enter the time in hours and minutes. Then press *
for AM or # for PM.
- Example:
900* = 9:00 AM and 230# = 2:30 PM.
- Display
shows [SET DATE MM-DD-YYYY].
- Use
the keypad to enter the month, day, and year.
- Example:
01011996 = January 1, 1996.
- Display
shows [SET DAY OF WEEK SUN].
- Scroll
through the day-of-week by pressing # to go forward or * to go
backward. When the desired day is displayed, press SPKR to terminate
programming. You hear a progress tone.
back
to top... |
